1. 将“KINGROON_KP3S_PRO_V2”文件夹放在cura5.0安装路径下的“share\cura\resources\quality”目录下。

2. 将“KINGROON_KP3S_PRO_V2.def.json”文件放置到安装路径中的“share\cura\resources\definitions”目录下。

3. 将"KINGROON_KP3S_PRO_V2_extruder_0.def.json"文件放在安装路径中的"share\cura\resources\extruders"目录下。

4. 把“KINGROON_KP3S_PRO_V2.STL "文件放在安装路径的“share\cura\resources\mesh”目录下。

5. 关闭所有打开的CURA软件，重新打开后添加KP3S_PRO_V2。


1. Place the "KINGROON_KP3SPRO_V2" folder in the "share cura resources quality" directory under the cura5.0 installation path.

2. Place the "KINGROON_KP3S-PRO_V2. def. json" file in the "share cura resources definitions" directory in the installation path.

3. Place the "KINGROON_KP3S-PRO_V2_extruder_0. def. json" file in the "share cura resources extruders" directory in the installation path.

4. Place the "KINGROON_KP3SPRO_V2. STL" file in the "share cura resources mesh" directory of the installation path.

5. Close all open CURA software and add KP3S after reopening_ PRO_ V2。